Connect with us

Good News

A Penumbral Lunar Eclipse Is Happening During The Full Moon This June

On June 5th and 6th, the Strawberry Full Moon will also pass through the faint outer shadow of the Earth, known as a penumbral lunar eclipse.

Avatar

Published

on

Like this article? Get the latest from The Mind Unleashed in your inbox. Sign up right here.

(TMU) – On June 5th and 6th, the Strawberry Full Moon will pass through the faint outer shadow of the Earth, known as a penumbral lunar eclipse, the second of four penumbral lunar eclipses this year. Weather permitting, those of you in Asia, Australia, Europe, Africa and the South Eastern areas of South America might notice the Moon turn slightly darker, or seem less bright, during the maximum phase of the eclipse. A penumbral lunar eclipse can be subtle and sometimes difficult to distinguish from a normal full moon.

While June’s Strawberry Full Moon eclipse may be visible from start to finish from some areas – a total of 3 hours 18 minutes – other areas will only experience the Moon rise or set during the eclipse. Check the time of the Full Moon eclipse in your city or town by clicking here, and set that time aside to watch the event. Unfortunately, for North America and most of South America, this event will be happening below their horizon.

Posted by The Rabbit Hole on Sunday, May 24, 2020

A lunar eclipse occurs when the Earth aligns between the Full Moon and the Sun, blocking the Sun’s rays from reaching the Full Moon.

A total eclipse occurs when Earths umbra – the central, dark part of its shadow – obscures all of the Moon’s surface. During a partial eclipse only a part of the Moon’s surface is obscured by Earth’s umbra. A penumbral lunar eclipse happens when Earth’s faint penumbral, outer shadow falls on the Moon, like the one we already experienced on January 10th and are what the remaining three lunar eclipses will be this year on June 5th, July 5th and November 31st.

Posted by The Rabbit Hole on Sunday, May 24, 2020

The early Indigenous people of North America kept track of the seasons and lunar months by naming them according to events during that time. June’s Full Moon is either the last full moon of spring, or the first of the summer, and is called the “Strawberry Moon”. According to The Old Farmer’s Almanac, the name originated with Algonquin tribes in eastern North America – and was used as a signal to gather the ripening wild strawberries. Colonial Americans adopted some of the indigenous moon names and applied them to their own calendar system – which is still used today.

Good News

Cliffhanger: Mountain Biker Saved From “Imminent Death” After Falling Into Canyon

Elias Marat

Published

on

Like this article? Get the latest from The Mind Unleashed in your inbox. Sign up right here.

A Southern California mountain biker is likely counting his blessings after he was rescued from what authorities describe as “imminent death”” after falling from the side of a cliff in the Angeles National Forest.

The mountain biker, described as an older man, fell into the canyon at Mt. Wilson on Thursday morning and was dangling hundreds of feet above the ground before his fellow bikers, and eventually a special team from the Los Angeles County Sheriff’s Department, rescued him.

For some time the man dangled by a thin cord around his ankle that was tied to his bicycle while hanging on for dear life “like a cat,” Capt. Tom Giandomenico of the LASD special enforcement bureau told the Los Angeles Times.

“He knew he was in such a precarious situation. He was just scared to even rotate his head to look at us. He just didn’t want to move a muscle,” LASD Deputy Richard Thomsen told CBSLA.

Additionally, when the helicopter team arrived it wasn’t just a matter of simply hoisting the man to safety, as the air generated by the helicopter’s rotor would have sent the man plummeting to “imminent death,” Giandomenico added.

“Because he was head-down on the rock face there, that dropped probably a good 40 feet before it hit some soft dirt and a boulder,” Sheriff’s Deputy Scott Helbring said. “And beyond that was hundreds of feet down to the bottom of the canyon.”

Instead, one of the members of the special enforcement team composed of former SWAT officers devised a plan to rappel down to the man and move him to a ledge below, from which the two could be airlifted to safety.

However, due to a lack of boulders or trees, there was nothing to tie a rope to – and thus no way to rappel down to anything.

So instead, the special enforcement team used the man’s brother and another friend to be their anchor, a plan that ultimately succeeded.

Giandomenico called the rescue “one of the more significant, courageous maneuvers I’ve seen.”

“Heroic, in my opinion,” he added.

Continue Reading

Animals

Rare Creature Photographed Alive In The Wild For The First Time Ever

Elias Marat

Published

on

Like this article? Get the latest from The Mind Unleashed in your inbox. Sign up right here.

Advances in the methods used by researchers to watch wildlife have allowed for the photographing of a rare creature whose image had never been captured in the wild before.

Researchers in the West African nation of Togo were able to spot the rare Walter’s duiker, a rare species of petite African antelope, for the first time in the wild thanks to camera traps equipped with motion sensors.

In addition to the Walter’s duiker, the camera traps were also able to discover rare species of aardvarks and a mongoose, reports Gizmodo.

At a time when the extinction of entire species is becoming more common worldwide, such devices should help conservationists not only preserve creatures sought by bushmeat hunters but also spot rare animals whose presence is elusive for human observers. In the past, biologists were forced to rely on the same hunters for information.

“Camera traps are a game changer when it comes to biodiversity survey fieldwork,” said University of Oxford wildlife biologist Neil D’Cruze.

“I’ve spent weeks roughing it in tropical forests seemingly devoid of any large mammal species,” D’Cruze continued. “Yet when you fire up the laptop and stick in the memory card from camera traps that have been sitting there patiently during the entire trip—and see species that were there with you the entire time —it’s like being given a glimpse into a parallel world.”

The Walter’s duiker was discovered in 2010 when specimens of bushmeat were compared to other duiker specimens. The new images of the creature are the first to have been seen.

Rare species like Walter’s duiker are often not listed as “endangered” by groups like the International Union for Conservation of Nature due to a lack of data.

Continue Reading

Good News

Formerly Homeless Man Enjoys New Life In First 3D-Printed Home In US

Elias Marat

Published

on

Like this article? Get the latest from The Mind Unleashed in your inbox. Sign up right here.

A formerly homeless man is now enjoying his advanced years in a comfortable, entirely 3D-printed tiny home – the very first of its kind in the entire U.S.

Tim Shea, 70, has struggled for much of his life with substance abuse, addiction, and homelessness.

However, the previously unhoused man is now the first person to live in a 3D-printed tiny home, which is now being touted as a model of engineering and sustainability, reports Green Matters.

The 400-square-foot 3D-printed tiny home was printed by nonprofit New Story and construction technology company ICON in the Austin, Texas, area in March 2018 before Shea moved into the location in September.

In 2019, New Story and ICON have also printed a similar community of tiny homes in Mexico, hoping to make good on the use of the technology as a tool to provide homes to the extremely poor.

According to Shea, his new domicile has made all the difference in the world.

“When I found out I’d be the first person in America to move into a 3D-printed home, I thought it was pretty awesome,” Shea told NY Post. “The very people I used to run away from, I’m running to. If you’ve been on both sides of the fence, you know some people just need a little encouragement and support.”

From start to finish, the process of printing and assembling these homes takes only 48 hours and relies on only 70 to 80 percent of the raw building material that conventional housing requires.

Continue Reading

Trending